GPS Port connection problem on Tue Jan 18, 2011 7:55 am
Posted: Fri Jul 12, 2013 10:00 am
I tried to use Maplorer on my Window CE 6.0 machine with
built-in gps.
When I run the program, it works great. The map is displayed
on the screen and can be moved around.
However, when I tried to show raw data of the GPS, I got only after I set up the word "invalid" on the last white box, but no raw data
received from GPS.
I am quite sure I have set up the right gps comm port with
correct baud rate. This is because if I set the gps comm
port to other, the program hangs up. I had also tried other
software such as GPS2blue, GPS2KML, Sirf Tech to check the
GPS comm port and all is working.
Please advise if Maplorer support only certain kind of GPSs,
and if Maplorer support GPS NEMA data.
Thanks a lot in advance.
built-in gps.
When I run the program, it works great. The map is displayed
on the screen and can be moved around.
However, when I tried to show raw data of the GPS, I got only after I set up the word "invalid" on the last white box, but no raw data
received from GPS.
I am quite sure I have set up the right gps comm port with
correct baud rate. This is because if I set the gps comm
port to other, the program hangs up. I had also tried other
software such as GPS2blue, GPS2KML, Sirf Tech to check the
GPS comm port and all is working.
Please advise if Maplorer support only certain kind of GPSs,
and if Maplorer support GPS NEMA data.
Thanks a lot in advance.